Home > Products > Foundry & Die Cast > Manifolds

Thumbnail panels:
  • 025 Bar Manifold
    24 in Wide Bar Manifold with (10) 025 Nozzles
  • Custom 025 Manifold
  • 510 Standard Manifold
  • 414 With Custom 032 Manifold
    414 Custom Manifold for Washing Machine Motor
  • 032 Bar Manifold Spraying
  • 042 Manifold
    Typical 042 Manifold on IRB 6400S Robot with (8) Nozzles
  • Custom 025 Manifold Spraying
    18 in Wide Single Lube with (8) 025 Nozzles
  • Custom Manifold
    Custom Manifold With (4) 022 Nozzles Mounted On IRB-140
  • Custom Robotic Manifold With Individual Nozzle Control
    025X Custom Manifold on IRB 6600 Robot with Independent Control of (32) Nozzles and Repositioning Tips
  • Bar Manifold With (12) 032 Nozzles
  • 032 Manifold System 2
  • 032 Manifold System
  • 032 Manifold for the 410
  • Custom 032 Manifold
    6 Zone Manifold With Extra Plate And Nozzles For End-on Core Spraying
Now Loading

Manifolds

Spray manifolds can be designed to fit each die caster's specific application. The standard type of manifold is a straight bar which lends itself to general die spray by sweeping and dwelling at multiple positions. The custom manifold sprays at a singular dwell location and can be designed to spray dies faster and with less lube promoting longer die life and a quicker start-up. Compared to hand spray, the standard straight bar manifold can reduce spray cycle times by 15% and the custom manifold can reduce the cycle time by 30%.

Standard Manifolds
Rimrock's standard manifolds are designed to mount nozzles in-line on a supply bar of adequate length to accommodate the dies. The nozzle mounting positions and nozzle tip configurations can change on the bar face to coincide with different casting spray requirements.

Custom Spray Manifolds
Rimrock's custom manifolds are designed for a specific die to allow the user to move the manifold to a particular position and precisely spray the die where lube is needed. Not only does this reduce the cycle time by eliminating several die spray positions, but it also reduces the amount of lube required. By utilizing the appropriate nozzle tip, custom manifolds are capable of spraying remote areas on the die such as deep or recessed top, bottom and side cores. Explore this page's picture gallery for examples of custom 032, 025, 025x, and extract & spray manifold systems.

Products
Related Products